Xerox B235, User Manual

Page: 119 / 316

Scanning to a Computer
Before you begin, make sure that:
• The printer firmware is updated. For more information, see Updating Software .
• The computer and the printer are connected to the same network.
FO R W I N D O W S U S E R S
Note: Make sure that the printer is added to the computer. For more information, refer to Installing the
Software .
1. Load an original document into the automatic document feeder or on the scanner glass.
2. From the computer, open W Wiinnddoow wss FFaaxx aanndd SSccaann.
3. From the Source menu, select a scanner source.
4. If necessary, change the scan settings.
5. Scan the document.
FO R M A C I N TO S H U S E R S
Note: Make sure that the printer is added to the computer. For more information, refer to Installing the
Software .
1. Load an original document into the automatic document feeder or on the scanner glass.
2. From the computer, do either of the following:
• Open IIm maaggee C Caappttuurree.
• Open PPrriinntteerrss & & SSccaannnneerrss, and then select a printer. Click SSccaann >> O Oppeenn SSccaannnneerr.
3. From the Scanner window, do one or more of the following:
• Select where you want to save the scanned document.
• Select the size of the original document.
• To scan from the ADF, select D Dooccuum meenntt FFeeeeddeerr from the Scan Menu or enable U Ussee D Dooccuum meenntt FFeeeeddeerr.
• If necessary, configure the scan settings.
4. Click SSccaann.
Xerox
®
B225/B235 Multifunction Printer User Guide
119
Scan