Xerox B210DNI, User Manual

Page: 41 / 205

Xerox
®
CentreWare
®
Internet Services
Xerox
®
B210 Printer
User Guide
41
Accessing Xerox
®
CentreWare
®
Internet Services and
Changing the Default System Administrator Password
For network printers, when you first access Xerox
®
CentreWare
®
Internet Services after printer
installation, the system prompts you to change the default system administrator password.
The initial default password is the printer serial number. The printer serial number is located on the
data label on the rear cover, and is printed on the Configuration report.
Note: For printers connected using a USB connection only, you do not need to perform this
procedure.
To access Xerox
®
CentreWare
®
Internet Services for the first time and change the default system
administrator password:
1. Access Xerox
®
CentreWare
®
Internet Services:
• To access Xerox
®
CentreWare
®
Internet Services from a Web browser, at your computer, open
a Web browser, then in the address field, type the IP address of the printer. Press
Enter
or
Return .
Note: If you do not know the IP address of your printer, refer to Finding the IP Address of Your
Printer .
• To access Xerox
®
CentreWare
®
Internet Services from a Macintosh print driver, at your
computer, select System Preferences

Printers & Scanners

Options & Supplies . Select
Show Print Webpage .
A message appears that prompts you to change the Administrator Settings.
2. To enter the default password, in the Password field, type the printer serial number.
3. To enter a new password, in the New Password field, type the new password.
Passwords can contain between 4 and 32 characters and the following characters can be used:
•
Letters: a - z, A - Z
• Numbers: 0 - 9
• Special Characters: @ / . ‘ & + - # * , _ % ( ) !
4. To verify the password, enter the password again in the Verify Password field.
5. To save the new password, click Save .
The Administrator Account password is updated and access to Xerox
®
CentreWare
®
Internet
Services is granted.