Xerox B210, User Manual

Page: 61 / 199

Network Connectivity
Xerox
®
B210 Printer
User Guide
61
• To search for an SSID, click Search Available and click the drop-down menu. Select an SSID
from the list.
Note: To refresh the list of available networks, click
Refresh
.
• To enter the SSID, click
Enter SSID
, then in the field, type the SSID.
5. For Security Type, select
WPA/WPA2-Enterprise
.
6. For Encryption Type, select an option.
7. For 802.1x Authentication, select the authentication method that your wireless network uses.
•
If you select
PEAP
, the enter the required details in the Identity Name, Username and User
Password fields.
8. For Root Certificate Setup , to upload a root certificate, do the following steps.
a. For Upload Root Certificate , to locate and select the file, click Browse .
b. Select the certificate required, then click Open .
c. Click Download .
9. For Address Acquisition , select a protocol option. If you select Static , you can change the IP
Address
,
Subnet Mask
, and
Gateway Mask
, as needed.
10. Click
Apply
.
Wi-Fi Direct
TM
You can connect to your printer from a Wi-Fi mobile device, such as a tablet, computer, or smart phone,
using Wi-Fi Direct.
Note:
• Wi-Fi Direct is disabled by default.
• When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator,
refer to
Accessing the Xerox® CentreWare® Internet Services Administrator Account .
Configuring Wi-Fi Direct Using Xerox
®
CentreWare
®
Internet Services
1. In Xerox
®
CentreWare
®
Internet Services, click Properties

Connectivity

Protocols .
2. Click Wi-Fi Direct
TM
.
3. For Wi-Fi Direct , select On .
4. For Device Name, type a name to appear in a list of available wireless networks and devices.
5. For IP Address, use the default or type a new IP Address.
6. To set the printer as Group Owner for a Wi-Fi Direct group, similar to a wireless access point, select
Activate
.
7. Enter a Network Key or use the default value.
8. To hide the Network Key, select the check box.
9. Click
Apply
.