Xerox B210, User Manual

Page: 55 / 199

Network Connectivity
Xerox
®
B210 Printer
User Guide
55
Raw TCP/IP Printing
Raw TCP/IP is used to open a TCP socket-level connection over Port 9100, and stream a print-ready file
to the printer input buffer. It then closes the connection either after sensing an End Of Job character in
the PDL or after expiration of a preset timeout value. Port 9100 does not require an LPR request from
the computer or the use of an LPD running on the printer. Raw TCP/IP printing is selected in Windows
as the Standard TCP/IP port.
Note: When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator, refer to
Accessing the Xerox® CentreWare® Internet Services Administrator Account .
Configuring Raw TCP/IP Settings Using Xerox
®
CentreWare
®
Internet
Services
1. In Xerox
®
CentreWare
®
Internet Services, click Properties

Connectivity

Protocols .
2. Click Raw TCP/IP Printing .
3. For Protocol , select Enable .
4. Ensure that Port Number is set to 9100.
5. Click Apply .
IPP
Internet Printing Protocol (IPP) is a standard network protocol that allows you to print and manage
jobs remotely.
Note: When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator, refer to
Accessing the Xerox® CentreWare® Internet Services Administrator Account .
Configuring IPP Using Xerox
®
CentreWare
®
Internet Services
1. In Xerox
®
CentreWare
®
Internet Services, click
Properties

Connectivity

Protocols
.
2. Click
IPP
.
3. For
Protocol
, select
Enable
.
4. Enter additional information as needed.
5. For Secure IPP Connection with SSL/TLS, select
Enable
.
6. Click
Apply
.