Back to Previous Page
8
Enable Wi-
Fi Direct from the “Easy Printer
Manager” application on your computer.
Wi-Fi Direct can be used as a backup connection, to
support wireless printing from non-networked
devices, and to access advanced settings in CWIS.
1.
Open
Easy Printer Manager
> Select
Advanced Settings
>
hover over
Device Settings
, then select
Network Settings
.
For
Wi-Fi Direct
, select
On
to enable the feature.
2.
Make note of the
IP Address
displayed. It will be used later to
access the printer's web interface (CentreWare Internet Services).
3.
For
Network Key
, enter a password that contains at least 8
characters. This password will be used later to connect to the
printer's Wi-Fi Direct signal.
4.
Click
Save
to save the settings.
Setup Wi-Fi Direct
Next
Back to Start
