Moving the Printer
To move the printer:
WARNING:
• To prevent electric shock, never touch the power plug with wet hands.
• When removing the power cord, ensure that you pull the plug and not the cord. Pulling the
cord can result in damage, which can lead to fire or electric shock.
1. Power off the printer.
2. Disconnect the power cord and other cables from the back of the printer. For details, refer to
Powering the Printer On or Off
3. Remove any paper or other media from the output tray.
4. To prevent possible injury, use two people to lift and carry the printer.
Caution:
When moving the printer between locations, do not tilt it more than 10 degrees
to the front, back, left, or right. Tilting the printer more than 10 degrees can cause toner
spillage and the printer to topple.
• Repack the printer and its options using the original packing material and boxes or a Xerox
Repackaging Kit. For a repacking kit and instructions, go to
• When moving the printer over a long distance, to prevent toner from spilling, remove the
toner cartridge and drum cartridge.
Caution:
Failure to repackage the printer properly for shipment can result in damage not
covered by the Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee. The
Xerox
®
Warranty, Service Agreement, or Total Satisfaction Guarantee do not cover damage
to the printer caused by improper moving.
5. After moving the printer:
a.
Reinstall any parts that you removed.
b.
Reconnect the printer to the cables and power cord.
c.
Plug in and power on the printer.
Xerox
®
B1022 Multifunction Printer
User Guide
117