3. If a login prompt appears, to enter the system administrator password, use the alphanumeric
keypad.
4. Select
Machine Setup
→
Auto Tray Switch
.
5. Select a paper tray option, then press
OK
.
SSeelleeccttiinngg tthhee D
Deeffaauulltt PPaappeerr TTrraayy aatt tthhee C
Coonnttrrooll PPaanneell
To select the default paper tray for copy jobs:
1. At the control panel, press the
Machine Status
button.
2. Select
System Setup
.
3. If a login prompt appears, to enter the system administrator password, use the alphanumeric
keypad.
4. Select
Paper Setup
→
Paper Select
→
Copy Tray
.
5. Select a paper tray option, then press the
OK
button.
Note:
Auto does not appear as an option when the Auto Tray Switch policy is set to Off.
For details, refer to .
C
Chhaannggiinngg tthhee RReedduuccee//EEnnllaarrggee PPrreesseett oonn tthhee C
Coonnttrrooll
PPaanneell
To set the Reduce/Enlarge presets:
1. At the control panel, press the
Machine Status
button.
2. Select
Copy Defaults
.
3. If a login prompt appears, to enter the system administrator password, use the alphanumeric
keypad.
4. Select
Reduce/Enlarge
.
5. Select a preset, then press the
OK
button.
Xerox
®
B1022 Multifunction Printer
System Administrator Guide
75
