HTTP
Hypertext Transfer Protocol (HTTP) is a request-response standard protocol between clients and
servers. Clients that make HTTP requests are called User Agents (UAs). Servers that respond to these
requests for resources, such as HTML pages, are called Origin Servers. There can be any number of
intermediaries, such as tunnels, proxies, or gateways between User Agents and Origin Servers.
EEnnaabblliinngg H
HTTTTPP aatt tthhee C
Coonnttrrooll PPaanneell
1. At the printer control panel, press the
Machine Status
button.
2. Select Network Settings.
3. If a login prompt appears, to enter the administrator password, use the alphanumeric keypad.
4. Select
Network Services
→
HTTP
→
On
.
C
Coonnffiigguurriinngg H
HTTTTPP SSeettttiinnggss iinn XXeerrooxx
®
®
C
CeennttrreeW
Waarree
®
®
IInntteerrnneett SSeerrvviicceess
1. In Xerox
®
CentreWare
®
Internet Services, click
Properties
→
Connectivity
→
Protocols
.
2. Click
HTTP
.
3. To enable the protocol, for Protocol, click
Enable
.
4.
For Keep Alive Timeout, enter the time that the printer waits for a response from a connected
user before it terminates the connection.
Note:
Increasing the Keep Alive Timeout can cause connections to slow down.
5.
Change the Port Number as needed.
Note:
If a Machine Digital Certificate is configured, you can edit the following fields.
6. For HTTP Security Mode, select a security option.
Note:
To allow connections to the Xerox device using HTTPS only, select
Require HTTPS
.
7. To enable one or more TLS versions, for TLSv 1.0, TLSv 1.1, or TLSv 1.2, select
Enable
.
8. Click
Apply
.
32
Xerox
®
B1022 Multifunction Printer
System Administrator Guide
