Xerox ApeosPort C6550 I, Network Administrator'S Manual

Page: 65 / 132

Network Setting Items (Port/Protocol) for CentreWare Internet Services
63
Us
in
g
C
e
n
tre
W
a
re
Int
e
rn
e
t Se
rv
ic
e
s
9
13
Select the [Enable] check box to enable the [TBCP Filter].
Note • The TBCP filter is set only when an optional PostScript3 kit is connected.
14
Set the [Tree Name].
Note • The tree name is set only when used in the Directory Service.
15
Set the [Context Name].
Note • The context name is set only when used in the Directory Service.
16
Select a frame type from the [Transport Protocol - Frame Type] pull-down menu.
17
Select the [Enable] check box to enable [SLP - Active Discovery].
18
Reflect the values as the machine's setting values.
1) Click the [Apply New Settings]. A screen to enter the user name and password will
be displayed.
2) Enter the System Administrator UserID and password into [User Name] and
[Password], and then click [OK].
Note • The default UserID is “11111” and password is “x-admin”.
3) The right frame on the web browser will change to the machine reboot display.
4) Click [Reboot]. The machine will reboot and the setting value will be reflected.