Xerox AltaLink B8145 User Manual Download

Page: 396 / 418

Product Symbols

SSYYM

OLL

DEESSC

CRRIIPPTTIIO

Warning:

Indicates a hazard that can result in serious injury or death if not avoided.

Hot Surface:

Hot surface on or in the printer. To avoid personal injury, use caution.

Warning:

Moving parts. To avoid personal injury, use caution.

Caution:

Indicates a mandatory action to take to avoid damage to the property.

Do not touch the part or area of the printer.

Do not touch this part of the printer.

Do not touch the part or area of the printer.

Do not expose the drum cartridges to direct sunlight.

Do not burn the item.

Do not burn the toner cartridges.

Do not burn the drum cartridges.

396

Xerox

AltaLink

B8145/B8155/B8170 Series Multifunction Printer User Guide

Product Symbols

Summary of Contents for AltaLink B8145



































































































































































































































































































































































































































Search results

Summary of Contents for AltaLink B8145

Reviews:

Related manuals for AltaLink B8145

Brands by name

Popular brands

Xerox AltaLink B8145, User Manual

Search results

Summary of Contents for AltaLink B8145

Reviews:

Related manuals for AltaLink B8145

Brands by name

Popular brands