Maintenance
216
Xerox
®
AltaLink
®
B80XX Series Multifunction Printer
User Guide
6.
To insert a staple cartridge, push the staple cartridge into the staple cartridge unit until it clicks into
place.
7.
Repeat the procedure for the other booklet maker staple cartridge.
8.
To close the staple cartridge unit, push the green tab up.
9.
Using the handle labeled 6b, push the booklet maker into the finisher.
10.
Close the finisher door.
Replacing Staples in the Convenience Stapler
1.
Lift the lever at the rear of the convenience stapler, then gently rotate the staple head toward you.
2.
Grip the staple cartridge and pull it out of the stapler head.
3.
Unpack the new staple cartridge. Remove any partial strips and any staple strips that are not flat.
4.
Install the new staple cartridge in the convenience stapler. The staple cartridge clicks into place.
5.
Release the lever at the front of the convenience stapler, then gently rotate the staple head away
from you.