Xerox 8254E, User Manual, Page: 114 / 244

4 Handling The Printer
104 8254E / 8264E User Guide
4.6.1.8 Origin menu
Allows you to set the location at which the printing of data will begin (i.e., its origin). Set the menu when
reprinting on the margin with changing the printing data position to the printed media.
Setup item Setting Description
Origin • X (print head transferring
distance):
00000mm to 99,999mm
• Y (media feeding
distance):
00000mm to 9,999mm
Changes the print head position and media feeding
distance using the following keys.
•
Pressing the [>] key decreases the print head
transferring distance.
• Pressing the [<] key increases the print head
transferring distance.
• Pressing the [+] key increases the media feeding
distance.
• Pressing the [–] key decreases the media feeding
distance.
1. Starting position
2. Media feeding direction
• Pressing the [Enter] key causes "Moving Origin Pos."
to be displayed in the control panel and the print head
to move to the starting position.
The following is then displayed in the control panel:
"Confirm Pos."
"Ready to Print"
Confirm Position
→
Enter • Pressing the [Enter] key or allowing a certain period
of time to pass determines the setting.
Print head returns to the original position.
Save the setting and shift to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)
—
• Pressing the [Cancel] key cancels the setting and
shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7 total)