Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 262 / 503

Phaser 5400 Laser Printer Service Guide 233
NVRAM Configuration (NVM Config)
The Non-Volatile RAM (NVRAM, or NVM) stores critical control parameters of the
mechanical and electromagnetic components of the printer. The following allows
service personnel to view status and/or change NVM settings.
Notes: Information displayed here requires entering Diagnostics
Mode. Refer to Entering Diagnostics Mode on page 221 for
instructions on entering Diagnostics Mode.
Some parameters are “read-only” and cannot be changed.
Refer to the Read/Write column in the table for specifics.
The Control Panel Legend to the right will aid in navigating
through the NVRAM Configuration Menu.
Note: “(R)” displayed on the LCD means Read-Only.
Table 123 NVRAM Configuration Menu
Press [1] or [5] to display: ⇒ Main Menu
NVM Config
Then, press [2] or (6) to display: ⇓ To view,
press Range /
Default To Adjust
Note: When password is requested,
sequentially press [0], [7], [3],
[4] to gain entry.
* = default
Resolution (R) [3] or [7] N/A / D* N/A - press [0] to exit
Laser Density (R) [3] or [7] N/A / 4* N/A - press [0] to exit
Fuser Stdby Temp (R) [3] or [7] N/A / 8* N/A - press [0] to exit
Fuser Run Temp (See Table 124 on
page 234 )
[3] or [7] 0 ~ F / 8* Press [3] or [7] to scroll to
desired setting.
Press [4] to set and exit.
Front Tray Size [3] or [7] 0 ~ F / 8* Press [3] or [7] to scroll to
desired setting.
Press [4] to set and exit.
Front Tray Opt (R) [3] or [7] N/A / 4* N/A - press [0] to exit
Process Tray 1 [3] or [7] 0 ~ F Press [3] or [7] to scroll to
desired setting.
Press [4] to set and exit.
Process Tray 2 [3] or [7] 0 ~ F Press [3] or [7] to scroll to
desired setting.
Press [4] to set and exit.
Process Tray 3 [3] or [7] 0 ~ F Press [3] or [7] to scroll to
desired setting.
Press [4] to set and exit.
Process MBF [3] or [7] 0 ~ F Press [3] or [7] to scroll to
desired setting. Press [4] to set
and exit.
Scan Tray 1 [3] or [7] 0 ~ 7 Press [3] or [7] to scroll to
desired setting.
Press [4] to set and exit.
0 1 2 3
4 5 6 7
0 1 2 3
On Line Menu Up Item Up Value Up
4 5 6 7
Enter Menu
Down Item
Down
Value
Down
s5400-352