Page 54
Xerox Document Centre User Guide
Copying Bound Documents using Build Job
Typical Application
Copy a multipage article that is spread throughout a
bound document all at once.
Procedure
1. Open the Document Cover and place the bound
original on the Document Glass. Align the spine of
the bound document with the Book Binding mark.
2. Make your programming selections by touching the
screen. The most common selections are on the Basic
Copying Tab (Output, 2-sided Copy, Reduction/
Enlargement, and Paper Supply).
3. Use the keypad to enter the number of copy sets.
4. Depending on the configuration of your machine
press the More Copy Features Tab or the Job
Assembly Tab.
5. Select Build Job then the Build Job On button. Press
Save.
6. Press the Bound Originals button then press the
button that identifies which pages you want to copy.
7. Press the Start (
) button.
NOTE
Use the Build Job Controls button to see a sample of the
last segment scanned, delete the last segment scanned,
or cancel a sample print job that is currently running.
8. Repeat this process until all the pages you want to
copy have been scanned.
9. Press the Build Job Controls button then select End
Build Job.
Summary of Contents for 460 DC/ST
Page 10: ...x Xerox Document Centre User Guide...
Page 14: ...xiv Xerox Document Centre User Guide...
Page 24: ...Page 10 Xerox Document Centre User Guide...
Page 85: ......
