Xerox 3250D - Phaser B/W Laser Printer Page 34 User Manual Download

Page: 34 / 90

Pull the paper straight up and out.

Insert the trays back into the printer. Printing automatically
resumes.

In the manual tray

Remove the jammed paper from the printer.

Open and close the front cover.

Load media into the manual feeder, then the printer resumes.

3250-022

3250-015

Areas near the print cartridge

Caution

The fuser area is hot. Take care when removing paper from the
printer.

Open the front cover and pull the

print cartridge

out.

Remove the jammed paper by gently pulling it straight out.

Replace the print cartridge and close the front cover. Printing
automatically resumes.

3250-013

3250-014

Summary of Contents for 3250D - Phaser B/W Laser Printer



























































































Search results

Summary of Contents for 3250D - Phaser B/W Laser Printer

Reviews:

Related manuals for 3250D - Phaser B/W Laser Printer

Brands by name

Popular brands

Xerox 3250D - Phaser B/W Laser Printer, User Manual

Search results

Summary of Contents for 3250D - Phaser B/W Laser Printer

Reviews:

Related manuals for 3250D - Phaser B/W Laser Printer

Brands by name

Popular brands