Xerox 2101, Configuration Manual

Page: 88 / 192

4
4-32 Performing Setup from the Control Panel
Polling Interval options
NetWare Server Poll Interval in Seconds
1–3600 [15]
Specify the interval, in seconds, at which the Fiery EX2101 communicates with the
Novell print server to see if there are print jobs waiting.
N
OTE
:
If you select a short interval, the amount of network traffic increases. This may
slow down other network jobs.
Windows Setup options
Network Setup
Service Setup
PServer Setup
Polling Interval
Whether you use NDS or Bindery services, choose Polling Interval from the main
PServer Setup menu. If you do not reset the interval, the default value of 15 seconds
is used.
Network Setup
Service Setup
Windows Setup
Enable Windows Printing
Yes/No [Yes]
Enabling Windows Printing enables Server Message Block (SMB), the file and
printer sharing protocol built into Windows. Enabling SMB allows the
Fiery EX2101 to be listed on the network so that Windows clients can print to a
particular print connection (Hold, Print, or Direct) on the Fiery EX2101 without
any other networking software. For information on setting up a Windows computer
for Windows printing, see the
User Software Installation Guide . Windows printing
runs via TCP/IP, so you must configure TCP/IP on the Fiery EX2101 and on all
computers that use Windows printing.