Xerox 2101, Configuration Manual

Page: 146 / 192

5
5-40 Setting up the Fiery EX2101 from a Windows Computer
Convert Paper Sizes
—Specify whether to convert paper sizes in documents
automatically to the default paper sizes specified. For example, if you select
Letter/11
x 17->A4/A3, a letter size job is automatically printed on A4 paper. If you
select No, the Fiery EX2101 prints the job only if it finds a media source in the size
specified by the job.
Print Cover Page
—Specify whether the Fiery EX2101 prints a cover page (job
summary) at the end of each print job. If you choose Yes, each print job is followed by
a page containing the name of the user who sent the job, the document name, the
server name, the time the job was printed, the number of pages printed, and the status
of the job. If a PostScript error occurs and the Print to PS Error option is set to Yes, the
Cover Page lists the PostScript error message instead of the job status.
Allow Courier Substitution
—Specify whether to substitute Courier for unavailable
fonts. When you choose Off, jobs requiring fonts unavailable on the Fiery EX2101
hard disk generate a PostScript error and do not print. This setting does not apply to
PDF files; font substitution occurs automatically for PDF files.
Print to PS Error
—Specify whether the Fiery EX2101 should print the available
portion of a print job when it encounters a PostScript error. In general, this option
should be
No.
• When you choose No, the printing of the entire job is canceled when a PostScript
error occurs, but the processed portion of the job and the PostScript error
information are stored on the Fiery EX2101. You can view the job and the error
information from the job management tools.
• When you choose Yes, the portion of the job processed before the error occurred
is printed.
Enable MSI Tray as default
—Select Yes to specify that jobs should be printed from the
MSI tray. Use this option to enable printing from the MSI tray when tray selection is
not otherwise available in the interface, such as when printing from the command line
(lpd or DOS). In general, select No when the interface permits tray selection on a
job-by-job basis.
Print Master
—Select Yes to allow FreeForm jobs to print the master page. This option
can be overridden from the printer driver.