Xeos XMR Series, User Manual

Page: 29 / 40

XMR User Manual 1.1 29
Response to commands
During testing, commands can be sent to the device to change configuration or request statistics.
These commands are read in during Iridium sessions and prompt responses from the XMR,
confirming that said commands were acted upon.

Send the $timer command, which will prompt the XMR to report its current timer
intervals.
Response to $timer
Deployment of the XMR
Below are installation tips for the XMR:

The top of the XMR must have as good a view of the full sky as possible.
o
Alongside a wall or tall obstruction will cause coverage to suffer.
o
The antenna surface must not be obstructed by metal or wood. Thick amounts of
other materials may also cause interference.

XMR should not be deployed near (less than 1 meter) other transmitters.