Petrel User Manual 0.1
5
Petrel Operation
Installation
When installing the Petrel there are several factors that can influence performance.
•
The Petrel
’s head
must be pointing directly upward as much as possible.
•
GNSS and AIS
performance may suffer if large angles of the horizon are blocked, such as if
the Petrel is next to a wall.
•
Do not use conductive material at the top of the Petrel around the glass lens; this will cause
the water sensor to fail.
Operational Tips
•
Connecting power, or power cycling the device will cause the device to restart from the
beginning of its operational cycle.
•
The beacon requires a good view of the sky for any test. It is necessary that any tests be done
outside of a building, far from potential obstructions.
State Diagram
Below is a diagram of the various transitions in the Petrel.
