Petrel User Manual 0.1
4
Preliminary Setup
Outside Diagram
The Petrel has several items of note to help identify a specific device. Shown below are those
identifiers along with key sections.
1 The AIS antenna is screwed into the top of the Petrel and must be added before using
2 The LED of the Petrel is located here. The titanium sections above and below the glass
must be shorted to trigger the water sense
3 The magnet switch for turning the Petrel on and off is located directly below the glass
4 The factory serial number of the Petrel is on the label.
5 A QR code is available to scan to download the manual on the label
6 The meeting point of the electronics head and battery chamber is torqued and should not
be opened. A sealing O-ring is installed here.
7 The bottom endcap is hand-tight for battery replacement. A sealing O-ring is installed here.
Physical Connection (Remote Head)
Pin Number
Name
1
N/C
2
N/C
3
N/C
4
+V Battery
5
N/C
6
Ground
Connector: MCBH-6F-TI, External View
