Xentino VX110, User Manual, Page: 5 / 16

“focus differently”
www.xentino.com
1.2 Specification

4-position DIP Switch

Selectable CO or CPE mode

Selectable 30a or 17a (VDSL2 Profile)

Selectable Band plan (Symmetric or Asymmetric)

Selectable target SNR margin (6dB or 9dB)

LED:

LAN: ACT/LNK,10/100Mpbs, Half/Full Duplex

VDSL: Power On/Off, CO/CPE, Idle/Trained/Link

Performance* (AWG24 Wire)
Downstream/ Upstream
17a Profile
600M 42/46 Mbps
1000M 18/13 Mbps
1500M 12/3 Mbps
2000M 5/2 Mbps
30a Profile
600M 40/45 Mbps
900M 22/19 Mbps
1200M 16/7 Mbps
1800M 8/2 Mbps
2100M 5/2 Mbps
*The above performance data is for reference only, the actual data rate may vary depending on the quality of the copper wire and environmental
factors.

LAN Interface:

RJ-45 connector

Complying with IEEE
802.3/802.3u/802.3x

10/100 Base-T Auto-Negotiation, Auto-
MDI/MDI-X.

VDSL Interface:

RJ-45 connector

DMT Encoding

Complying with ITU-T
G993.1/993.2/G.997.1

On-board surge protection

Regulatory Compliance

CE

FCC Part 15 Class B

EN60950

Power supply:

Option 1: 5 -20 Vdc over terminal block
(External Power Adaptor not included)

Option 2: 12 Vdc over 2.1mm DC Jack
(External Power Adaptor included)

Dimension: 73.4mm x 96.2mm x 22.8mm

Temperature: -20
°
C ~ 65
°
C

Humidity: 0%~95%RH (non-condensing)