Xentino VX110, User Manual, Page: 4 / 16

“focus differently”
www.xentino.com
Chapter 1 Introduction
VX110 VDSL2 Ethernet Extender is a high-speed Ethernet Extender with one Ethernet port (RJ-45 connector) and
one VDSL port (RJ-45 connector). It is a bridge mode modem, well accommodating VDSL2 (Very-high-data-rate
Digital Subscriber Loop) technology to extend Ethernet service over single-pair phone line. It is compliant to ITU-T
G.993.2 standard and supports VDSL2 30a profile that features 100Mbps of symmetric data rate over the existing
copper wires. Supporting both symmetric and asymmetric transmission, it can reach up to 100/100 Mbps bandwidth
(line rate) within 300M or 10/10 Mbps (line rate) for 1 Km long range connections. By providing ultra-high speed, the
VDSL2
VX110 Ethernet Extender makes your telephone line achieve its best performance than before. It has the
advantage of minimum installation time (simply as plug-n-play) and minimum expense by allowing video streaming and
data to share the same telephone pair without interference.
VX110 VDSL2 Ethernet Extender delivers everything needed to quickly deploy a high-speed IP-based network for
providing high-speed Internet access, video-on demand services and voice services. The resulting compact, cost-
effective form factor offers Systems Integrators, small business owners an attractive Long Reach Ethernet solution.
1.1 Features

Cost effective bridge function to connect two Ethernet LAN

Support flow control on Fast Ethernet port via PAUSE frame or Back Pressure

IEEE 802.1Q VLAN tag transparent

Easy installation via simple plug-and-play

Selectable CPE and CO mode via DIP switch:

Two working modes are built in the same unit, which keep the flexibility of installation and easy provision of
service but lower inventory of service provider

Selectable VDSL2 profile mode (17a or 30a):

Support up to VDSL2 30a profile to ensure high data rate.

Selectable target band plan:

Symmetric: Support the band plan G.997 and provide the symmetric transmission on both downstream and
upstream.

Asymmetric: Provides highest line rate in short range in asymmetric mode.

Selectable target SNR margin

Compatible with the D24M/D08M DSLAM & third party DSLAM.

Compatible with the 2U 19-inch, 17-slot chassis.