Xenon 1900, User Manual

Page: 88 / 356

3 - 10
Off . If you want the scanner to shut down when in the base cradle, scan Shut
Down Scanner in Cradle . Default = Scanning in Cradle On (for CCB01-
010BT).
Paging
Paging Mode
By default, the paging button on the base or Access Point pages the scan-
ners associated with that base or Access Point. If you want the paging but-
ton on your base or Access Point to be disabled, scan the
Paging Mode
Off bar code, below. When Paging Mode is off, the base or Access Point
will no longer page scanners when the button is pressed. The red LED on
the base or blue LED on the Access Point will remain lit to indicate that
Paging Mode is off. (This light will go out when the button is pressed, then
back on when it’s released.)
Default = Paging Mode On.
Scanning in Cradle Off
* Scanning in Cradle On
Shut Down Scanner in Cradle
* Paging Mode On
Paging Mode Off