Xenon 1900, User Manual, Page: 172 / 356

6 - 18
will sound. If you wish to hear the error tone when a non-matching bar
code is found, scan the
Data Format Non-Match Error Tone On bar code.
Default = Data Format Non-Match Error Tone On.
Primary/Alternate Data Formats
You can save up to four data formats, and switch between these formats. Your
primary data format is saved under
0 . Your other three formats are saved under
1 , 2 , and 3 . To set your device to use one of these formats, scan one of the bar
codes below.
Single Scan Data Format Change
You can also switch between data formats for a single scan. The next bar
code is scanned using an alternate data format, then reverts to the format
you have selected above (either Primary, 1, 2, or 3).
* Data Format Non-Match Error
Tone On
Data Format Non-Match
Error Tone Off
Primary Data Format
Data Format 1
Data Format 2
Data Format 3