Specification
Model
XEDHDA28V12Q-1080
Image Sensor
1/2.9" SONY 2.4MP CMOS
Sensor
Resolution
1080P
Signal System
PAL / NTSC
Min Illumination
0.001 Lux/F1.2
S/N Ratio
More than 50dB
Sync System
Internal
IR Distance
20 Meters (with14
μ
x 24PCS
Infrared LED)
IR Power On
Photodiode AUTO Control
Video Output
AHD/CVI/CVBS/TVI
Power/Current
DC12V(+/-10%)/700mA
Lens
2.8-12mm Manual Zoom
Lens
Dimension (mm)
Φ
131 x 93(H)
Weight (g)
800
Operating
Conditions
-10~+50
Ԩ
RH95% MAX
Accessory list
Type
Qty
Camera
1
User Guide
1
Camera connections
Safety instructions
1.Before using the camera ,please read this
manual carefully and keep it safely for later use.
2.Installation should be proceed by professional
service and follow manufacturer’s instructions, do
not dismantle without authorisation.
3.In order to prevent sensor ,do not expose lens to
intense light source in long time.
4.Do not touch sensor directly. Please covers the
dustproof cover when the camera is not being
used.
5.Please use a dry soft cloth to clean the camera.
If dirt difficult to clean, use detergent with water
and wipe dry the camera.
6.Do not install camera under air conditioning’s air
gate ,or else lens blur with condensation of
moisture.
7.Please ensure that all electric power sources are
turned off when not open , installation ,clean, etc
operation.
8.Please transporting , using and storing the
camera in allowable temperature and humidity.
9.If the camera was broken, for example power
cord or plug damaged, Splash liquid or foreign
matter fall into camera, raining, wetting, etc can’t
work situation, please contact manufacturer or
maintenance centre (modify and maintenance
without permission, you must be responsible for
the problems).
XEDHDA28V12Q-1080
Installation and user guide
Thank you for choosing to use this
Xeno High Definition Analogue
camera.
Before providing power for the camera,
please read this manual carefully
before use.
Note:
Do not attempt to disassemble the camera. If the
camera does not work, please your supplier.
