XENO XDR5K4, Setup And User'S Manual

Page: 37 / 187

37
4.2 Operations in Live View Mode
In live view mode, there are many functions provided. The functions are listed below.
•
Camera : showing only one screen on the monitor.
•
Multi-screen: showing multiple screens on the monitor simultaneously.
•
Start/Stop Sequence: the screen is auto switched to the next one. And you must set the dwell time for each
screen on the configuration menu before enabling the auto-switch.
Menu>Display>Live View>Non Event Sequence Dwell Time
•
Play: play back the recorded videos for current day.
•
Log Off: log out current user whom already logged in.
•
Alarm Cancel/Panic:
Cancel the latest active alarm, start panic recording if there isn’t any alarm active.
Note: It is recommended that either the HDMI or VGA is used as the main monitor output. If the composite CVBS output
is used then the is reduced functionality.
4.2.1 Using the Mouse in Live View
While in Live view mode right click the screen to display an on screen menu giving the following options:
Figure 4.1 Right-click Menu
Table 4.2 Mouse Operation in Live View
Name Description
Camera Switch to the single full screen by choosing channel number from the
dropdown list.
Multi-screen
Adjust the screen layout by choosing from the dropdown list.