User Manual
Manx-camera
Company confidential.
This document is the property of Xenics. It may not be reproduced
–
completely or partially
–
or passed to a third
party without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2019-UMN005
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R003
BE-3001 Leuven
Belgium
www.xenics.com
Date: 15/05/2020
XF-104_03/20-12-2012
Page 52 of 73
Example 7
Trigger mode
Acquisition
Multiframe
Line trigger
Free running
Frame trigger
External trigger 1
Acquisition frame count
2
Acquisition burst frame count
1
Acquisition start command is given.
Camera waits for frame trigger
Camera captures 1 frame per frame trigger
Acquisition stops after 2 frames.
Table 6-7 MultiFrame acquisition with frame trigger
Figure 6-18 MultiFrame acquisition with frame trigger
AcquisitionMode = MultiFrame;
AcquisitionFrameCount = 2;
FrameTriggerMode = ExternalTriggered;
FrameTriggerInput = Ext1;
AcquisitionBurstFrameCount = 1;
AcquisitionStart();
Frame 1
Frame 2
AcquisitionStart();
Ext1 trigger 1
Ext1 trigger 2
Frame 3
Frame 4
2 frames are acquired.
A trigger is necessary
for each of them.
AcquisitionStop() is
optional.
Ext1 trigger 3
Ext1 trigger 4
