8
│
Remote Control
Instructions for remote controller shortcuts
1.
Dimmer ( Adjust the brightness )
By pressing the Dimmer button, it will adjust the brightness level from 0,
20, 40, 60, 80 and 100.
Default is 100 ( Only available when smart light sensor is disabled )
2.
Sleep ( Set the sleep time out )
Select the time to automatically turn off the monitor.
The minimum is 10 minutes and the maximum is 240 minutes.
3.
Picture ( Set the modes of the picture )
Enable to select the picture modes you prefer.
Press this button and then you can select Standard, Mild, User, or Dynamic
4.
PC AUTO ( Auto adjust, only on VGA )
By pressing PC AUTO, it will auto adjust the image.
5.
Source ( Select the source )
Press this button to select the input signal to display.
If one of these modes is disabled in OSD menu, please setup under
( ADJUST
→
Source Enable )
