TO CHARGE YOUR MOBILE DEVICE USING THE POWERBANK
By cable:
• Plug your cable into the USB port on the power bank, the other end goes
into your device.
• Your device will show a charging condition in the usual way, blue light will
show on the power bank.
• The power bank will take approximately two hours to charge your mobile
device to 95%.
• After you have charged your device, recharge the power bank before
using again.
Wireless:
• Make sure your phone is compatible for wireless charging.
• Switch on the powerbank using the on button. Hold the button for 3 seconds
to start the wireless function.
• Put your wireless charging enabled device on the wireless charging surface
of the powerbank.
Imporant: Only use included accessories or certified and tested accessories
to charge the powerbank. Using third party accessories can influence the
item safety.
TO CHARGE THE POWERBANK
By cable:
• Plug in the supplied micro USB cable to your wall charger or computer USB
port. The USB connector goes to your charger, the micro USB goes to your
powerbank.
• The blue indicator lights will start blinking when charging. When all lights are
full the item is fully charged.
• When fully charged disconnect the powerbank and it’s ready to use.
