7. Wireless LAN
In order to set up a wireless LAN connection (also called wireless LAN, WLAN or WiFi),
e.g. to a variometer, here explained with the XCVario, the device must activate the
“Wireless LAN” in Setup/Options/Wireless. After that, you can connect to the
corresponding WiFi network ID of this device in your XCTouchNav WiFi settings. The
network ID of the XCVario is identical to the Bluetooth ID, e.g. XCVario-5678. To
connect with the secured WiFi (https) it is required to enter the password as documented
in the manufacturers handbook of the device.
Page 8
