1
Safety Instructions & Regulations
1.A rea of application
The XCSPhone case is an Intrinsically Safe (ic) Ruggedized Phone solution that is
designed for industrial use in potentially explosive areas classified as C1D2 /
Zone2 in accordance with directive 94/9/EC.
2. Safety precautions
These safety instructions contain information and safety regulations that must be
observed to ensure safe operation under the described conditions. Failure to follow
these instructions and this information can have serious consequences or constitute
a violation of the applicable regulations.
Please read through these safety instructions carefully before starting to use the
device! In the event of conflicting information, the safety instructions shall take
precedence. In the event of any doubt, please contact Xciel.
3. Faults and damage
If there are grounds for you to believe that the safety of the device has been
impaired, stop using it and remove it from the hazardous area immediately.
Measures should be taken to prevent the device from being used again
accidentally. The safety of the device may be impaired under the following
circumstances:
- The rubber case is visibly damaged.
- The device has been exposed to excessive loads.
- The device has not been stored properly.
- The warranty seal is damaged or has been removed.
- The device has been damaged in transit.
- The marking or labeling on the device is illegible or non-existent.
- Malfunctions occur.
- The permitted limit values have been exceeded.
