User manual XC-32 XC-320 XC-4200
p
Activate DTR signal of serial port n°1 (mux defaultdtr yes 1).
p
Enable redirection of DSR signal to DTR signal of client Xcell (mux dsrredirect dtr 1).
DSR signals of client and server's Xcell must absolutly be activated at startup. If DSR
signal on client's side Xcell is not activated at startup, Xcell can't establish the initial
connection.
Moreover, an undetermined DSR signal on server's side Xcell can force client Xcell to
break initial connection before this connection can be established.
State of DTR (or RTS) signal on the terminal will be applied to DCD on client Xcell. This
Xcell will be able to establish or break the connection matching with terminal state (on or
off).
Others parameters (
serial quick yes
and
serial timeout 180
) allow to start the
connection only if Xcell is receive a character.
VII.7.3 - Configuration of client's side Xcell
ROOT>> serial mode mux 1
Ok!
ROOT>> serial linectrl modem 1
Ok!
ROOT>> serial timeout 180 1
Ok!
ROOT>> mux defaultdtr yes 1
Ok!
ROOT>> mux ip 192.168.2.1 1
Ok!
ROOT>> mux port 1 1
Ok!
ROOT>> mux ctsredirect none 1
Ok!
ROOT>> mux show 1
Port Mode Sync Flush KAlive Remote( IP, port)DCD->DSR->CTS-> debug
------------------------------------------------------------------
1 mux No Yes 0 192.168.2.1 1 none dtr none No
ROOT>> serial show 1
-56-
