User manual XC-32 XC-320 XC-4200
dialin
ROOT>> modem show dialin
The
modem comment
command enables you to add comments about the modem (its
whole name for example) :
ROOT>> modem comment mod33600 "modem Xcell 33600 bauds"
The
init modem
command enables you to change modem initialization sequence. For
more informations about the AT commands, consult your modem's documentation.
Example :
ROOT>> modem init mod33600 at&k3%c3
The
modem dial
command enables to define connection sequence of the modem.
Example :
ROOT>> modem dial mod33600 atd
This form must be associated to the port where the modem is located :
ROOT>> serial modem mod33600 1
IV.9 - Audit
Audits generate some usefull information to control Xcell's activity or to analyse
configuration errors. These information are displayed in real time or redirected a file. Audit
commands enable you to set type and level of captured information, as well as the
displaying mode of information.
IV.9.1 - Audit on a remote machine
To create an audit on a remote machine, use the
audit add
command with following
parameters :
AUDIT ADD <syslog | trap> <remote IP> <level> <type>
p
Syslog / Trap
: if you use syslog option , information will be sent to syslogd daemon of
the specified remote machine. If your machine does not run syslogd daemon, you must
install one.
If you use an smtp administration soft, you can display Xcell's audit thanks to the trap
option.
p
Remote IP
: It is the IP address of the remote machine on which you will display Xcell's
-29-
