XCell Fury Extreme Assembly Manual
Page 56 of 138
Copyright Miniature Aircraft USA
Created: 11/14/2006
This document may not be distributed without permission of Miniature Aircraft USA
4B.1.d 4B.1.e 4B.1.f
4B.1.g 4B.1.h 4B.1.i
Building Notes – you should dial indicate the fan runout to less than .002” using a dial
indicator as shown. Runout should be checked on both the face and the top edge of the fan
hub.
The collet system usually makes alignment fairly easy, however if you’re having problems
getting runout to an acceptable level, contact Miniature Aircraft by phone or via the support
forum located on the website.
#0332
#546-5
#546-11
#546-5 – OS – small ledge
#546-11 – YS – deep ledge
#546-16 (2)
