.
2 0
.
.
2 1
.
Clean the glass
1.Clean the glass 2.Connect the recorder to the bracket
Carefully wipe the windshield clean Attach the camera as shown in the picture below
free of dust and oils until it clicks into place
3.Recorder adsorption 4.Power cable installation
Turn the knob on the suction mount Follow the illustration below to lay out the
assembly counterclockwise to loosen it, cabling of your camera from the windshield to
then stick the suction cup to the glass. the cigarette lighter jack to power your device
Turn the knob clockwise to secure the from.
suction mount onto the glass.
*The illustration above shows how to connect your camera to the cigarette lighter jack. Note: The cigarette
lighter jack’s placement may vary from vehicle to vehicle.
