Ports on the Back
No
Port
Description
1
Ethernet LAN Port
Connect to the Local Area Network
2
Ethernet Computer Port
Connect to your Personal Computer, the
X-44
works
as a network switch.
3
Power Connection
Plug in the supplied power supply after plugging in the
LAN ethernet port or use a PoE switch. If using a PoE
switch, there is no need to use the power supply.
4
Network Activity LED’s and Reset Button
There are two Green LED’s, one that shows the
connection to the network and the other shows the
connection to any attached device, such as a Personal
Computer. In addition, there is a default button that
allows you to set the telephone back to factory default.
Product Overview
16