17
3.5. Teach-out/Reset
The MAX! Eco Switch can be reset to the initial state
manually. Restoring the initial state deletes all settings and information about taught-in devices.
• First remove the batteries from the battery compartment.
• Wait 60 seconds.
• Press and hold down the button at the top or bottom.
• Re-insert the batteries at the same time.
• Press and hold down the button until the device LED starts to flash. Release the button. The factory settings are restored.
3.6. LED flashing sequences and transmission behaviour
The LED’s flashing sequences have different meanings:
3.7. Mounting in existing switches
The MAX! Eco Switch is designed to fit into frames supplied by the following manufacturers:
3.8. Technical data
Supply voltage:
3 V
Batteries:
2x LR03 (micro/AAA)
Battery life:
5 years approx.
Receiver frequency:
868.3 MHz
Receiver class:
SRD Class 2
Typical range of transmission
in the open air:
100 m
Housing dimensions:
86 x 86 x 16.5 mm (W x H x D)
Subject to technical changes.
3.9. Safety instructions
This device is not a toy; do not allow children to play with it. Do not leave packaging material lying around, as it can be
dangerous in the hands of a child. Do not open the device: it does not contain any components that need to be serviced
by the user. In the event of an error, please return the device to our service department.
3.10. Note on environmental protection:
After the implementation of the European Directive 2002/96/EU and 2006/66/EU in the national legal system, the following
applies:
Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are
obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the
public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the
respective country. This symbol on the product, the instruction manual or the package indicates that a product is
subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are
making an important contribution to protecting our environment.
Hereby, Hama GmbH & Co. KG, declares that this 00111932 is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC. See www.hama.com for declaration of conformity according to R&TTE Directive
99/5/EC guidelines.
Flashing sequence Meaning
1x flash
Confirmation following successful sending of the radio command
2x flashes
Duty cycle has been exceeded. The longest period to wait before sending again would be an hour.
3x flashes
Error message, radio command not sent successfully
Manufacturer
Frame
Berker
S.1, B.1, B.3, B.7 glass
ELSO
Joy
GIRA
System 55, Standard 55, E2, E22, Event, Espirit
merten
1-M, Atelier-M, M-Smart, M-Arc, M-Star, M-Plan
JUNG
A 500, AS 500, A plus, A creation
