Xantrex XS400, Owner'S Manual

Page: 55 / 88

Operating in Invert Mode
975-0054-01-01 3–5
Operating in Invert Mode
In invert mode, the XS400 powers your appliances from the battery. If the
On/Standby switch on both the XS400 and the S400 Remote Switch are
turned to On ( ), the XS400 automatically supplies your appliances with
inverter power if the shore power source fails or becomes disconnected.
To operate the XS400 in invert mode:
1. Disconnect the XS400 from shore power.
2. Turn the On/Standby switch on the XS400 to the On
( )
position.
The Inverter ON light illuminates on the XS400.
AND
If you have installed the S400 Remote Switch, turn the S400 Remote
Switch to On
( ).
The Inverter ON light illuminates on the S400 Remote Switch.
3. Operate your appliances.
If you are not using the XS400, see “Turning the XS400 to Standby When
Not in Use” on page 3–3.
Important:
The XS400 operates normally without the S400 Remote
Switch installed.