Xantrex XPLORE 120A 12V, Owner'S Manual, Page: 68 / 72

Physical Specifications
54 XPLORE 120/12 Battery Charger Owner's Guide
Physical Specifications
XPLORE Charger
AC input connections 3-position WAGO terminal block
accepts a three color-coded 8AWG
(10mm
2
) wires (G/PE, L, N)
Battery output connections 7-position DC stud terminals @ color
coded max 4AWG (16mm
2
) (6
positives and 1 common negative)
Unit weight 16.3 lbs (7.4 kg)
Figure 20 Physical Dimensions [inches(mm)]
6.5”
165mm
16.3”
413mm
12.6”
321mm
9.6”
243mm
10.2”
258mm
0.2”
5mm
11.2”
285mm
BLE Module
Unit dimensions
L
0.97 in. (24.8 mm)
W 2.95 in. (74.8 mm with flanges),
2.78 in. (70.7 mm with hole center)
H 1.98 in. (50.3 mm)
Cable length 25 ft (7.6 m)
Connector type RJ-12
Environmental Specifications
XPLORE Charger
Operating range
a –4 to140 °F (–20 to 60 °C)
Storage –40 to 176 °F (–40 to 80 °C)
Humidity 5 to 95%, RH non-condensing
Ingress Protection
IP32 (in specified mounting orientations
only)
a
70% current derating above 40 °C (104 °F). Operation may be limited depending on battery chemistry.
Consult with the battery manufacturer for specific operational capacities regarding their batteries.