Xantrex XPLORE 120/12, Owner'S Manual, Page: 50 / 68

Transitioning Power States
38 XPLORE 120/12 Battery Charger Owner's Guide
Transitioning Power States
Turn ON the XPLORE Charger:
n
Connect the batteries to the charger then connect AC
power at the source. The charger runs through a preset
charging cycle.
There is only ONE way to safely turn the XPLORE Charger
off (Disable):
1. Disconnect AC power at the source.
2. Disconnect all DC batteries.
DANGER
ELECTRICAL SHOCK HAZARD
n
Do not disassemble the battery charger. Internal capacitors
remain charged for five minutes after all power is
disconnected.
n
Disconnect both AC and DC power from the battery charger
before attempting any maintenance or cleaning or working
on any circuits connected to the battery charger. See note
below.
Failure to follow these instructions will result in death or serious
injury.