Maintenance
NOTE
: Perform these inspections at least two times per year.
n
Make sure the charge controller remains in a dry environment.
n
Clean up any accumulated dust or dirt on the unit.
n
Check all the wires and cables for insulation damaged. Repair or
replace, if necessary.
n
Tighten all terminal connections to the correct torque values, if
applicable. Inspect for loose or broken wire connections.
n
Confirm that all terminals are free from corrosion
n
If installed in the system, check and confirm that the lightning
arrestor is in good condition. Replace, if necessary.
34
975-1012-01-01 Rev B
Oct 2019
Summary of Contents for SOLAR CHARGE CONTROLLER 30
Page 1: ...Owner s Guide 30A PWM Charge Controller 709 3024 01...
Page 38: ......
Page 39: ...This page has no content...
