![background image](http://html1.mh-extra.com/html/xantrex/ph1800-gfp/ph1800-gfp_installation-manual_3176236042.webp)
Installation
3–2
975-0289-01-01
Assembling the Components
Important:
Ensure that the location chosen for the inverter allows 8 to
12 inches (15.2 to 30.5 cm) clearance behind both the inverter and the Battery
Box(es). Additional room may be needed for access.
Figure 3-1
Preparing the Components for Assembly
1. Decide on which side of the inverter box
the Battery Box will be placed and locate the
four #6-32 mounting screws on that side(s) of
the inverter. These screws can be identified
by the small ring of bare metal around them.
2. Loosen these screws just
enough to allow the keyhole slots
on the side of the battery Box to
slip over the top of them. Do NOT
remove these screws completely.
Inverter Side View
Mounting Screw
Bare Metal
Continued in Figure 3-2.
975-0289-01-01(PowerHub_1800_IG).book Page 2 Thursday, June 4, 2015 9:49 AM
Summary of Contents for PH1800-GFP
