975-0593-01-01
7
Power Manager Configuration
The Freedom Sequence Intelligent Power Manager’s configuration settings
can only be controlled with the Xanbus System Control Panel (SCP).
Accessing the Freedom Sequence’s configuration settings start from the
SCP System Status screen shown below.
Pressing the
Enter
button from the System Status screen brings up the Select
Device screen. From the Select Device screen, a user can choose a Xanbus
component device such as a power manager. In the example below, the
Freedom Sequence power manager is designated as
FSPM 00
.
Figure 4
Xanbus System Control Panel (SCP) System Status
Xanbus System Control Panel (SCP)
FGA: 809-0921
AC In/Charge
Inverter On
Low Battery
Fault
STBY/ON
Fault Clear
T M
Enter
Fun
c
System Status
Battery
BatLev
Load
AC In
menu
Figure 5
Xanbus System Control Panel (SCP) Select Device
System Status
Battery
BatLev
Load
AC In
menu
Enter
Fun
c
Enter
Fun
c
Select Device
System Settings
FSPM 00
SCP
Clock
menu
Use the highlighted
(
Enter
) button to
activate the Select
Device screen.
Use the highlighted (up
and down) buttons to
choose a device.
FSequence IPM Owners Guide.book Page 7 Thursday, October 6, 2011 3:33 PM
