975-0593-01-01
11
This
gu
id
e for
us
e by qu
alifi
ed installers only.
Installing the Freedom Sequence
Overview
Be sure to read the safety guidelines and pay attention to all cautions and
warnings throughout the installation procedure. The installer is responsible
for ensuring compliance with the installation codes for your particular
application.
Installation Sequence
To make the installation quick and easy, Xantrex recommends that the
installation tasks be performed in the following sequence:
1.
Mount the Freedom Sequence.
2.
Connect the AC Main wires.
3.
Connect the AC Relay wires.
4.
Connect the DC Relay wires.
5.
Interconnect the Xanbus components.
6.
Turn on the SCP and bring the Freedom Sequence to Safe Mode.
7.
Configure Freedom Sequence via the SCP.
8.
Turn on the RV power system.
Step 1: Mounting the Freedom Sequence
Follow the requirements laid out under the section “Location” on page 7. To
begin,
(1)
place the Freedom Sequence on the surface to which it will be
installed and mark the mounting holes on the surface with a pencil.
(2)
Pilot
drill the holes, if necessary.
(3)
Secure the Freedom Sequence unit to the
surface using appropriate fasteners such as size M5 screws. Use the
recommended torque of between 4.0–4.4 Nm. Do not overtighten.
FSequence IPM Install Guide.book Page 11 Thursday, October 6, 2011 3:21 PM
Summary of Contents for Freedom Sequence
Page 2: ...FSequence IPM Install Guide book Page ii Thursday October 6 2011 3 21 PM...
Page 10: ...FSequence IPM Install Guide book Page ii Thursday October 6 2011 3 21 PM...
Page 30: ...FSequence IPM Install Guide book Page 20 Thursday October 6 2011 3 21 PM...
Page 31: ...FSequence IPM Install Guide book Page i Thursday October 6 2011 3 21 PM...