Power Source Wiring
14
Xantrex Gateway Owner's Guide
Power Source Wiring
100Ah @ 12V
A
B
C
E
F
G
D
c
Attach battery cables to the 2-pin
connector before plugging the connector
to the Xantrex Gateway.
a
The Xantrex Gateway has no power
switch.
A
Xantrex Gateway
E
10A fuse/fuseholder
B
Power port 2-pin connector (supplied)
F
Battery disconnect device
ac
Keep the disconnect device open to
prevent energizing the Xantrex Gateway.
C
Battery pos(+) cable
G
Battery
D
Battery neg(–) cable
Freedom Combox Wiring
NOTE
: Consult the Freedom Combox Owner's Guide for more information.
c
CAN network termination may be
required. See how to activate it using
the web app
c
Only one auxiliary device can be
connected at any time. In this diagram, a
universal control monitor is connected
via the RV-C port.
A
Xantrex Gateway
D
RV-C (CAN port) 4-pin connector with
pigtail (supplied). Splice the connector to
one end of the patch cable.
B
25-ft cable supplied from the optional
Freedom X inverter. Connect to
REMOTE port.
E
Patch cable (not supplied)
C
Optional Freedom X inverter
