08905096A
-
1
-
INSTALLATION INSTRUCTIONS
CPLCT
Coaxial to Optical Digital Audio Coupler
DESCRIPTION
Xantech’s digital audio signal converter is an easy to install, clean approach to converting S/PDIF
digital audio signals from coaxial to optical format. Combine with the Xantech Optical to Coaxial
Digital Audio Coupler (CPLTCX)* to provide a long distance alternative using lower cost coaxial cable
instead of optical cable.
You will need an EIAJ optical cable (Toslink)* and a coaxial cable* with RCA style ends. The length
should be based on your application.
*
sold separately
SPECIFICATIONS
Power supply, 6VDC, 200mA (included)
Size: 2-1/4” (W) x 3-1/4” (L) x 7/8” (H)
INSTALLATION
[1] Connect one end of the coaxial cable to the output port on the source component (DVD, CD
player, etc.). Connect the opposite end to the CPLCT device.
[2] Connect one end of the optical cable (Toslink) to the input port (Digital receiver, digital speakers).
Connect the opposite end to the CPLCT device.
[3] Connect the power supply to the CPLCT. A red pilot indicates the CPLCT is active for use.
