www.xa.com/en
4
Pre-Assembly Preparations
1. Disassemble the Head Cover
Lift the head cover up from the front, then
push it backwards.
2. Disassemble the Antenna Frame
Remove the antenna frame fixing screws, and
remove the antenna frame from the airframe.
3. Disassemble the Central Hatch Cover
Remove the fixing screws of the central
hatch cover to dismantle the hatch cover.
Before reassembling the arms, please ensure that the markings on the upper plate of the airframe
match the markings on the aluminum sleeves of the arms (Refer to Page 3, Figure 3: Airframe Module
& Arm Position). Incorrect assembly of the arms may cause accidents during flight.
1
2
Warning
Airframe Assembly
