www.xa.com/en
11
Note: Only devices that have obtained the right to use at the XAG Service mini-program can be successfully paired.
Steps
①
Once your remote control and smartphone are wirelessly connected via hotspot, open XAG AGRI
APP
,
and select “Device”;
②
Click “Add Device” to start device searching;
③
After the system prompts "Please power UAS again, or the RTK device is set to pairing mode",
restart the UAV for pairing;
④
If successfully paired, a “Successful Pairing” notification will display, and the device will be displayed
on the device interface;
⑤
Check if the UAS is functioning normally by selecting the UAS and "USE” button. If “IN USE” is then
displayed, it means the device is functioning normally.
Note: Before pairing, please visit the “XAG Service” WeChat mini-program and click "My Device"-"Scan QR Code to Add Device" to scan the QR
code printed on the airframe.
Pair the UAV
