XAG P Series, Pilot Operating Handbook, Page: 68 / 73

@2018 XAG Australia All Rights Reserved Page | 68
Post-Flight Recommendation
Upon Task completion, the aircraft will return to home and land automatically. Once the operation had
been completed, or the user of a different chemical are required, XAG recommends the pilots to clean out
any possible residue that may remain within the Aircraft and the liquid container. Any residues remaining
within the aircraft may pose hazardous to other operating personnel and shorten the operating lifespan of
your aircraft. Please follow the instructions below for in-field cleaning:
Spray System Module
Open Propulsion Module and perform Nozzle Test:
1. Select “Manual Check”
2. Follow the On-screen instruction and perform the
system check on Spray System. This functions would
allow the pilot to dispense and clean the inner tube
from any remaining residue
WARNING
USE ONLY Water for Nozzle Cleaning