XAG P Series, Pilot Operating Handbook, Page: 64 / 73

@2018 XAG Australia All Rights Reserved Page | 64
Operation Flight Parameters –Flight Route
This interface provides basic information about the
dosage settings for the Task. Click on this section to
adjust the settings.
Standard Pattern
Operator may operate the UAV into a Standard pattern
application where the aircraft will operate in an even
route pattern within the selected field.
Border Pattern
Operator may operate the UAV into a Border pattern
application where the aircraft will only follows the
border of the selected field.
Start Point
This setting will allow operators to adjust the starting
point of the UAV
Return Point
This setting will allow operators to adjust the return
point of the UAV